Parker’s broad range of solenoid and proportional cartridge valves are complemented by a wide selection of options in the Super Coil series of IP69K DC and AC coils. Multiple voltage and termination styles are standard cataloged options.

Super Coil 5/8 Inch

The robust design of Parker’s 5/8″ Super Coil is especially suited for challenging environments. Internal wires have a class N rating, providing longer life at typical temperatures. All coils are DC wound. An internal full wave rectifier is added for AC current, eliminating inrush current, and allowing for voltage interchangeability. Coils are offered in a wide variety of terminations, including integrally molded connectors and voltages to meet your system requirements. Coil is encased in a thermoplastic polyester resin. This allows for higher temperature exposure and less distortion. This resin is also resistant to moisture, caustic solutions and fungus providing protection for coil windings. Zinc plated low carbon steel frame surrounds coil, increasing flux density. Low carbon steel provides better magnetic properties and greater permeability. Internally molded diodes are available. Polarity is molded into coil for ease of installation. External ridges provide a larger coil surface area, which allows for better heat dissipation. Parker’s Super Coil is a robust IP69K product that has undergone extensive water dunk, endurance, high pressure water spray, and chemical solvent testing.

Markets:
• Oil and Gas
• Material Handling Equipment
• Construction Equipment
• Agriculture Machinery
• Vocational & Municipal Equipment
• Transportation

Features/Benefits:
• 5/8 inch inner diameter
• Integral Deutsch connector coil exceeds IP69K standards
• Integral Deutsch connector coil thermal shock dunk test rated
• Integral Amp Jr. coil exceeds IP67 standards for thermal shock, water resistance and “dunk capability”
• Universal 50/60 Hz operation
• Waterproof coil hermetically sealed, requires no O-rings or waterproofing kits
• External plated steel flux-carrying band (unlike encapsulated band) enables coil to withstand severe thermal shocks without cracking
• Symmetrical coil can be reversed without affecting performance

Applications:
• Power Units
• Drills
• Presses
• Mixers
• Balers
• Combines
• Cranes
• Compactors

For additional voltage or termination options, please consult the factory for details.

Additional technical insight:
The 5/8 inch coils are most commonly used with 10 and 12 size cartridges. Typically, low watt coils are used in low pressure (less than 3000 psi) applications and the high watt coils in high pressure (up to 5000 psi) applications.

Parker’s 1 inch DS Coil is a high power coil often used with 12, 16, and 20 size proportional or on-off solenoid cartridges. Multiple voltage and termination styles are standard cataloged options.

DC Coil 1 Inch

Parker’s proven 1 inch DS coils are ideal for use in applications that require high flow and/or pressure. The DS coil is available in low and high watt versions for application flexibility and all coils are rated for continuous duty. Standard voltages are 12 and 24 VDC, with termination styles including DIN connectors, Dual Spade, and Dual Leads. DS coils are also capable of handling variable current, therefore, they can be used with proportional valves as well as on-off solenoid valves. The DS compact glass filled nylon encapsulating material makes it resistant to moisture, caustic solutions, fungus, and temperatures from -40°C to 200°C (-40°F to 392°F.)

Parker’s 1” DS coil is a robust product that has undergone extensive testing and has a proven application performance record. Combined with Parker’s extensive line of solenoid and proportional cartridge valves, the DS coil is ideal for the most challenging applications and industries.

Markets:
• Oil and Gas
• Material Handling Equipment
• Construction Equipment
• Agriculture Machinery
• Vocational & Municipal Equipment
• Transportation

Features/Benefits:
• Compact one piece encapsulated design
• Numerous terminals and voltages
• Heavy gauge color coded lead wire with built-in strain relief
• 200°C Class N wire standard
• U.L. recognized on most DC coils (consult factory)

Applications:
• Power Units
• Drills
• Presses
• Mixers
• Balers
• Combines
• Cranes
• Compactors

The HLC coil series is for use on Parker solenoid cartridge assemblies in potentially hazardous environments.

HLC Coil Series

The Parker HLC family of Explosion Proof Solenoid Coils are robustly designed to function in rugged environments. These coils are well suited for use in potentially explosive or hazardous gas environments. With its modular design due to a rotatable conduit cover and wide range of global certifications, Parker’s HLC series of Explosion Proof Coils are perfect for your most challenging application.

Markets:
• Oil and Gas
• Power Generation

HLC Coil Series

Features/Benefits:
• Fits standard on/off solenoid products
• Includes terminal block for ½” NPT and M20 x 1.5 conduit connections
• Modular design for multiple valve options
• Multiple global certifications for regional flexibility
• Corrosion Resistant up to 1,000 Hour Salt Spray
• Conduit cover may be rotated in four directions and is removable for ease of installation

Applications:
• Turbine Process Control
• Specialty Actuators

HLC Coil Series

Additional technical insight:
HLC Series is designed for two position, on-off solenoid valve products in the Parker standard catalog. Consult factory for applications utilizing other products. HLC Series performance varies from the standard Super Coil. Consult factory for valve performance in applying the HLC series Explosion Proof coil.