T6*M Series

The high pressure design reduces installation costs and provides extended life at reduced pressure. The combination of different cartridges in double and triple pumps allows low flow at high pressure and high flow at lower pressure. This is the intelligent way to optimize your circuit design. The pump also allows a very fast pressure cycle change with a very precise flow repeatability.

Markets:
• Mobile
• Agriculture
• Marine
• Military

Features/Benefits:
• Decreased Energy Consumption : Reduced heat generation and speeds down to 400 RPM at full pressure are supported by the high mechanical and volumetric efficiency, which is typically 94%.
• Reduced Noise Level : The T6*M series is designed to reach the lowest noise level in the smallest envelope, supported by its wide speed range capability, combined with large size cartridge displacements.
• Longer Lifetime : Parker’s proven double lip vane approach increases the resistance to particle contamination. The low ripple pressure ± 2 bar reduces piping noise and increases protection of other components in the circuit.
• Straightforward Installation : The vane pump port orientation ensures that customized installation is easy and is ideal in restricted access conditions. In addition, installation design is extremely simple as the same body is used for all displacements.

Applications:
• Refuse trucks
• Tipping trucks
• Steering

T6*R Series

Parker drive train vane pumps reduce installation costs and drive extended life due to their high pressure capability, up to 275 bar in a small operating envelope.

Markets:
• Industrial
• Mobile

Features/Benefits:
• Optimized Energy Consumption – The mechanical & volumetric efficiency is consistently 94%, reducing heat generation and allowing speeds down to 400 RPM at full pressure.
• Low Noise Level – The T6*R series has a wide speed range capability from 400 RPM to 3600 RPM, combined with large size cartridge displacements, driving the lowest noise level in the smallest envelope.
• Long Lifetime – The double lip vane concept increases the resistance to particle contamination. The low ripple pressure reduces piping noise and protects other components in the circuit.
• Manageable Installation – The port orientation allows customized installation and is ideal in restricted access conditions. In addition, utilising the same body for all displacements highly simplifies installation design.

Applications:
• Presses
• Injection machines
• Cranes

T6CCZ Series

Parker’s hydraulic mobile pump T6CCZ series reduces installation costs and provides extended life for Cardan mounting. The T6CCZ pump incorporates Parker high quality and performances of T6CC series vane pumps mobile applications.

Markets:
• Environment
• Mobile

Features/Benefits:
• Energy consumption – The high mechanical & volumetric efficiency, typically 94%, reduces heat generation and allows
speeds down to 400 RPM at full pressure.
• Noise Level – The wide speed range capability from 400 RPM to 2800 RPM, combined with large size cartridge displacements, will optimize operation for the lowest noise level in the smallest envelope.
• Lifetime – The double lip vane concept increase the resistance to particle contamination. The low ripple pressure ± 2 bar reduces piping noise and protect other components in the circuit.
• Installation advantage – Ports orientation allows customized installation and is ideal in restricted access conditions. Same body for all displacements highly simplify installation design.

Applications:
• Refuse trucks
• Tipping trucks

SDV Series

The SDV Series is a fixed displacement vane pump, ideal for low to mid pressure applications up to 2250psi. The double pump provides the flexibility of two different displacements within one housing. The single pump provides one displacement within one housing. The compact design and low noise features make them well suited for filter carts, test stands, remote pilot pumps, and for hi/lo circuits.

Features/ Benefits

• Two compact frame sizes available
• Low noise
• 100% tested
• easy to convert and repair

T6G, T67G & T6ZC Series

Parker’s hydraulic pump T6G, T67G & T6ZC series allow you an extended lifetime due to the reinforced bearing combined to the vane technology. The high pressure capability up to 300 bar, in the small envelope, reduces installation costs and provides extended life at reduced pressure.

Markets:
• Environment
• Mobile

Features/Benefits:
• Energy consumption – The high mechanical & volumetric efficiency, typically 94%, reduces heat generation and allows
speeds down to 400 RPM at full pressure.
• Noise Level – The wide speed range capability from 400 RPM to 3600 RPM, combined with large size
cartridge displacements, will optimize operation for the lowest noise level in the smallest envelope.
• Lifetime – The double lip vane concept increase the resistance to particle contamination. The low ripple pressure ± 2 bar reduces piping noise and protect other components in the circuit.
• Installation advantage – Ports orientation allows customized installation and is ideal in restricted access conditions. Same body for all displacements highly simplify installation design.

Applications:
• Refuse trucks
• Tipping trucks
• Cranes

Additional technical specifications:
• Competitive advantage : Our Torque / Weight ratio is under the limit given by most of PTO truck manufacturer.

DCP Series

With the Drive Controlled Pump, Parker offers speed-controlled, hydraulic full-system solutions that are tailored exactly to a predefined circle in advance. Thus, they provide high energy efficiency, reduced noise emissions and lower component costs.

Drive Controlled Pumps essentially consist of three components: an AC drive unit (frequency controller and electronics), an asynchronous or synchronous motor, as well as a hydraulic pump. The pump can be either a vane pump – in single or multiple design – or a variable displacement axial piston pump. Drive Controlled Pumps enable the central, regulated hydraulic supply of all drives. Thus they provide the exact power that is required in the cycle at all times.

Markets:
• Industrial
• Molding

Features/benefits:
• Less motor and cooling power required – ensures significant energy savings
• Speed reduction at partial load – reduces noise emissions, increases component lifetime
• Smaller components with higher energy density – reduces investment costs
• Optimum adjustment to cycle requirements – higher precision and dynamics
• Free Parker DriveCreator software – enables optimum dimensioning of all components

Applications:
• Machine tools
• Die cast
• Presses
• Injection molding

DCP Series