MEDIA CONVERTER FOR ZONE 2
The 9721 series media converter converts electrical Ethernet networks into optically inherently safe “op is” Ethernet networks, allowing installation and maintenance work to be conducted on fibre optics in Zones 0, 1 and 2 without the need for downtime (hot swapping/hot working). It is particularly suitable for the IS1+ Ethernet remote I/O system. The extremely compact media converter may also be installed in Zone 2.
MEDIA CONVERTER FOR ZONE 2
- For 100 Mbit/s Ethernet with inherently safe “op is” fiber optic in Zone 0, 1 or 2
- Range up to 5 km (multi-mode) or up to 30 km (single-mode)
- Increased temperature range of -30 to +75 °C
3 SERIES (6 PRODUCTS
- For 100 Mbit/s Ethernet with inherently safe “op is” fiber optic in Zone 0, 1 or 2 and Class I, II, III Div.1 or 2
- Range up to 5 km / 3.1 mi (multi-mode) or up to 30 km / 18.6 mi (single-mode)
- Increased temperature range of -30 to +75 °C / -22 to +158 °F
- Easy commissioning, no configuration required
- Installation in Zone 2 and Class I, Div. 2 or in the safe area
- For operation of up to four inherently safe optical fiber cables <0x201C>op is<0x201D> according to IEC 60079-28
- For 100 Mbit/s Industrial Ethernet with “op is” fiber optic in Zone 0, 1 or 2 and Class I, II, III Div.1 or 2
- Transmission range up to 5 km / 3.1 mi (multi-mode) or up to 30 km / 18.6 mi (single-mode)
- Extended temperature range -30 to +70 °C / -22 to +158 °F
- Redundant supply
- Installation in Zone 2 and Class I, Div. 2 or in the safe area
- Reliable, bidirectional conversion from USB to RS485
- LED status displays
- Extreme robust against interference
- Extended temperature range -40 to +75 °C
- Power supply via USB port