ANALOGUE I/O MODULES
Universal modules for analogue inputs and outputs (AIOM) in hazardous areas
Analogue input? Analogue output? With R. STAHL’s universal modules (analogue I/O modules, or AIOM for short), anything is possible: Each of the eight channels can be used individually as either an input or an output, transmitting the data in both directions to connected HART field devices. The inputs/outputs for 0/4 to 20 mA and HART are “ia” intrinsically safe and short-circuit proof.
HART analogue universal modules can be used to connect up to eight intrinsically safe analogue unit signals (0/4 to 20 mA) to the IS1+ remote I/O system. Digital communication with connected field devices can take place in both directions using the HART protocol.
Each channel can be used as an input for connecting two-, three- or four-conductor transmitters, or as an output for connecting positioners or indicators. The Ex i inputs/outputs are short-circuit proof and galvanically separated from the system.
A blue LED and diagnostic messages provide early warnings that maintenance is required in order to avoid system downtime.
The Zone 1 versions have additional LEDs for each channel to indicate any line faults.
- Multi-functional: Each channel can be used individually as an input or an output
- Versions with Ex ia inputs/outputs for installation in Zone 1 or Zone 2
- Hot-swappable: Can be replaced while the system is in operation
1 دیدگاه
بهترین مطلبی که میتونستم پیدا کنم